Listening To The Radio - Pioneer KEH-p4020 Operation Manual

(~1i_u_ne_r
)
Listening to the radio
:=1;
BAND indicator
Shows which band the radio is tuned to, AM
or FM.
(?)
FREQUENCY
indicator
Shows to which frequency the tuner is
tuned.
(~
PRESET NUMBER
indicator
Shows what preset has been selected.
'f
STEREO (0)
indicator
Shows that the frequency selected is being
broadcast in stereo.
CIJ
En
(~-----)
1 Press
SOURCE
to select the tuner.
2 Use
VOLUME
to adjust the sound level.
When you press
VOLUME
up/+, the volume is
raised and when pressed down/-, the volume is
lowered,
3 Press
BAND
to select a band.
Press
BAND
until the desired band is displayed,
F1. F2, F3 for FM or AM.
4 To perform manual tuning, press
~
or
~
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold
~
or
~
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
~
or
~
with a quick press.
• If you press and hold
~
or
~
you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
• Note
• When the frequency selected is being broad-
cast in stereo the STEREO
(OJ)
indicator will
light.
C!J