Pausing Cd Playback; Introduction Of Audio Adjustments - Pioneer KEH-p4020 Operation Manual

C~M_u_lt_i._C_D_P_la_y_e_r
)
1 Select the repeat range.
Refer to Repeating play on page 14,
( Audio Adjustments
Introduction of audio
adjustments
)
2
Press and hold
PAUSE/SCAN for about two
seconds
to turn scan play on.
DSCN
(scanning tracks) or
SCAN
(scanning
discs) appears in the display. The first 10 sec-
onds of each track of the present disc (or the
first track of each disc) is played.
3 When you find the desired track (or disc)
press and hold
PAUSE/SCAN for about two sec-
onds
to turn scan playoff.
The track (or disc) will continue to play,
UNote
• After track or disc scanning is finished. nor-
mal playback of the tracks will begin again,
o
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press
PAUSE/SCAN
to turn pause on.
PAUSE
appears in the display. Play of the cur-
rent track pauses,
2
Press
PAUSE/SCAN
to tu rn pause off.
Play will resume at the same point that you
urned pause on,
0
(]I)
En
CD
AUDIO
display
Shows the audio adjustments status.
@
LOUD
indicator
Appears in the display when loudness is
turned on.
Press
AUDIO
to display the audio function
names.
Press
AUDIO
repeatedly to switch between the
following audio functions:
FAD
(balance adjustment)-EQ-L (equalizer)-
LOUD
(Ioudness)-FIE (front image
enhancer)-SLA (source level adjustment)
• When selecting the
FM
tuner as the source.
you cannot switch to
SLA.
• To return to the display of each source, press
BAND.
UNote
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
0