Louver Control - Fujitsu AS*G18LFCA Service Instruction

7. LOUVER CONTROL

1. VERTICAL LOUVER CONTROL
(Function Range)
Each time the button is pressed, the air direction range will change as follow:
: During Heating/ Cooling/ Dry modes
, , , , ,
The Remote Controller's display does not change.
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
During Cooling / Dry mode : Horizontal flow
During Heating mode
During AUTO mode operation, for the first a few minutes after beginning operation,
airflow will be horizontal
Direction
Only the direction of the Airflow Direction Louver changes; the direction of the Power Diffuser does not change.
The airflow direction setting will temporarily become
the airflow is low at the start of the Heating mode.
After beginning of AUTO/HEAT mode operated and automatic defrosting operation time,
the air flow will be horizontal
However, the Airflow Direction cannot be adjusted at beginning AUTO operation mode.
2. HORIZONTAL LOUVER CONTROL
(Function Range)
Each time the button is pressed, the air direction
range will change as follows.
Cooling / Heating / Dry mode / Fan mode
The Remote Controller's display does not change.
3. SWING OPERATION
To select Vertical Airflow Swing Operation
When the swing signal is received from the remote controller, the vertical louver starts to swing.
(Swinging Range)
Cooling mode / Dry mode / Fan mode(
Heating mode / Fan mode(
When the indoor fan is S-Lo or Stop mode, the swing operation is interrupted
and it stops at either upper end or bottom end.
To select Horizontal Airflow Swing Operation
When the swing signal is received from the remote controller, the horizontal louver starts to swing.
(Swinging Range)
All mode : 1 5
When the indoor fan is S-Lo or Stop mode, the swing operation is interrupted
and it stops at either upper end or bottom end.
To select Vertical and Horizontal Airflow Swing Operation
When the horizontal swing signal is input from remote control, the combination of the vertical
and horizontal swing operation is performed.
: Downward flow
; the air direction cannot be adjusted during this period.
.
1 3 ) :
) :
4 6
1
2
3
4
5
6
when the temperature of
4
1
2 3
1
4
3 6
01-07
5