Setting The Sleep Timer - Toshiba 40SL412U Easy Setup Manual

Setting the sleep timer

You can set the sleep timer to turn off the TV after a
set length of time (maximum of 12 hours).
To set the sleep timer using the remote control:
Press on the remote control to set the length of
time until the TV turns off. Repeatedly press
increase the time in 10-minute increments, or press
or to increase or decrease the time in 10-minute
increments, to a maximum of 12 hours.
To set the sleep timer using the on-screen
menus:
1
and open the Setup menu.
Press
2
Highlight Sleep Timer and press
3
Press the number buttons to enter the length of
time in 10-minute increments.
4
Press .
Note: When a power failure occurs, the sleep
timer setting may be cleared.
To display the remaining sleep time:
Press .
To cancel the sleep timer:
Press repeatedly or press
0 minutes.
Chapter 6: Using the TV's features
Automatic Power Down
The TV will automatically turn itself off (standby)
after 4 hours, if you do not operate the TV either
from the remote control or the TV control panel.
1
to 2
3
Note:
•
•
•
.
No Signal Power Down
The TV will automatically turn itself off after 15
minutes when no signal is detected.
You can change the setting to Off for the following
purposes:
or until it is set to
•
•
1
2
3
Note:
•
•
From the Preferences menu, highlight Energy
Saving Settings and press
Press or to select Automatic Power Down.
to select On or Off, and press
Press or
The initial setting of this feature is off.
1 minute before switching to standby, a
warning message will appear.
When the following features are set, the
feature that is set for the nearest time will
function.
− Automatic Power Down
− Sleep Timer
− No signal auto power off (after 15 minutes
of no signal)
Low signal strength of analog channel (no signal
detection.)
Only Audio L/R is connected to external input to
listen to music through the TV speakers.
From the Preferences menu, highlight Energy
Saving Settings and press
to select No Signal Power Down
Press or
and press .
Press or to highlight the item you want to
change, and press or
Default setting is all On.
A warning message will appear 1 minute
before turning off.
.
.
.
to select On or Off.
(continued)
47