Adjust Settings; General Setup; Audio Setup - Philips mcd909 User Manual

8 Adjust settings

General setup

1
Press SYSTEM.
» [General Setup] menu is displayed.
2
Press .
3
Select an option and then press OK.
4
Select a setting and then press OK.
• To return to the previous menu,
press .
• To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[Disc Lock]
Set play restriction for specific discs.
Before you start, place the disc in the disc
compartment (maximum 40 discs can be
locked).
• [Lock] – Restrict access to the
current disc. You need to enter a
password to unlock and play the disc.
• [Unlock] – Play all discs.
Tip
•
To set or change the password, go to
[Preference Setup] > [Password].
[OSD Language]
Select the preferred language for on-screen
display.
This apparatus supports Philips EasyLink,
which uses the HDMI CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI connectors can be controlled by a
single remote control.
•
[EasyLink]
SYSTEM.
[Screen Saver]
The screen saver protects the TV screen
damage due to prolonged exposure to a static
image.
[DivX(R) VOD Code]
Display the DivX
•

Audio setup

1
2
3
4
Note
Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
• [One Touch Play] - Turn on or off
one touch play.
• [System Standby] - Turn on or off
one touch power-off. You can use
the remote control of this apparatus
to turn the apparatus and all
connected HDMI devices to standby
mode.
• [System Audio Control] - Turn on
or off one touch audio control.
• [Audio Input Mapping]
and map audio input from all the
connected devices.
• [On] – Enable the screen saver.
• [Off] – Disable the screen saver.
®
registration code.
Tip
Enter this DivX registration code when you
rent or purchase video from www.divx.com/
vod. The DivX videos rented or purchased
®
through the DivX VOD (Video On Demand)
service can be played only on the device to
which it is registered.
Press SYSTEM.
Press to select [Audio Setup], and then
press
.
Select an option and then press OK.
Select a setting and then press OK.
- Scan
EN 25