Table of Contents
Advertisement
8 Adjust settings
You can customize various kinds of settings as
you prefer. Refer to the following instructions to
navigate through the setup menus.
Symbol
Note
•
If the setup option is grayed out, it means the
setting cannot be changed at the current state.
General setup
General Setup
EasyLink Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
Sleep Timer
DivX(R) VOD Code
1
Press
SETUP .
» [General Setup] menu is displayed.
2
Press .
3
Select an option, then press OK .
30
EN
Options
[General Setup]
[Audio Setup]
[Video Setup]
[Preferences]
4
Select a setting, then press OK .
•
To return to the previous menu,
press
BACK .
•
To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[EasyLink Setup]
If this Home Theater System is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the
following commands simultaneously:
Option
Description
[EasyLink] Turns off or on all EasyLink
features.
To disable this feature, select
[Off] .
[One
When you press PLAY , the
Touch
TV and Home Theater System
Play]
are turned on. Disc play starts
if there is a disc in the Home
Theater System.
To disable this feature, select
[Off] .
[One
When you press and hold
Touch
STANDBY for at least three
Standby]
seconds, the Home Theater
System and all the HDMI CEC
devices switch to standby
simultaneously.
To disable this feature, select
[Off] .
[System
When you play audio that is
Audio
routed from the connected
Control]
devices, this Home Theater
System switches to the
corresponding audio source
automatically.
To enable this feature, select
[On] . Then proceed to [Audio
Input Mapping] to scan and map
all the connected devices.
SETUP .
Advertisement
Table of Contents
