Other Features; Set The Alarm Timer; Set The Sleep Timer; Listen To An Audio Device - Philips mcd909 User Manual

9 Other features

Set the alarm timer

This unit can be used as an alarm clock. The
DISC, TUNER or USB is activated to play at a
preset time.
Note
•
Ensure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER.
»
The hour digits are displayed and begin
to blink.
2
Turn VOLUME+/- or press VOLUME+/-
on the remote control to set the hour.
3
Press SLEEP/TIMER to confirm.
»
The minute digits are displayed and
begin to blink.
4
Turn VOLUME+/- or press VOLUME+/-
on the remote control to set the minute.
5
Press SLEEP/TIMER to confirm.
» OFF] (OFF) begins to blink.
[
6
Turn VOLUME+/- or press VOLUME+/-
on the remote control to select [ON]
(ON).
7
Press SLEEP/TIMER to confirm.
»
The timer is set and activated.
To deactivate the timer
• Select [ OFF] (off) in step 6.
• If timer is activated, the display
shows .
• If timer is deactivated,
on the display.

Set the sleep timer

This apparatus can switch to standby
automatically after a set period of time.
1
To deactivate sleep timer
1

Listen to an audio device

You can listen to an audio device through this
apparatus.
1
2
3
disappears
When the apparatus is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
»
When sleep timer is activated, the
display shows .
Press SLEEP/TIMER repeatedly until [--] is
displayed.
»
When sleep timer is deactivated,
disappears on the display.
Connect a 3.5mm audio cable (not
supplied) from the AUX socket to the
audio output socket audio device.
Press AUX.
Start to play the device (see the device
user manual).
EN 29