Samsung SR8875 User Manual page 17

Assembling the cleaner
NAME OF EACH PART
Charging Lamp
Charge Pin
Distance Detection Sensor
Installing the batteries
■
Batteries are not supplied with the product. You have to purchase the batteries separately.
Install the alkaline batteries (type D) before use.
1
Lift the cover of the VIRTUAL
GUARD while pressing the
locking tab.
[ Charger (Station) ]
[ VIRTUAL GUARD ]
Mode Lamp
2
Install the batteries into
the VIRTUAL GUARD
as shown by the fi gure
below. (If the batteries are
installed with the incorrect
polarity, the VIRTUAL
GUARD will not work.)
Power Lamp
Mode/Power Button
Main Body Detection Sensor
3
After inserting the tip of the
cover into the slot, push the
other end to close it until it
clicks into place.
✽ Specifi cation: Alkaline Type D (LR20) batteries
Assembling the cleaner _17
Remote Control Holder
Vents
Catching Sill