Crankshaft - Yamaha QT 50F Service Manual

2. To remove the oil seal, it is advisable to
use long-nose pliers. Insert the long-
nose pliers into a soft area of the oil
seal, pinch it and pry it out.
r-CAUTION:
Place a wooden piece on the case to
protect it against scratching.
The screw has a mark "OPEN -*" on its
head. Turn it in the direction of the ar-
row to remove.
V>*-'>.v!'.f>f^if.:
1. Screw 2. Hexagon wrench
3. Remove the distance collar, bearing,
driven pinion, and thrust shim form the
rebore to next over-size.
L. Crankcase
1. Working in a crisscross pattern, loosen
each screw 1/4 turn. Remove screws
after all are loosened.
2. As illustrated below, remove the crank-
case-right by tapping it with a soft-
faced hammer.
|
oVOycC?"^
E f p v2/ "
———iv_^\\aT\
Wti
\ °)
-0= ^
M. Crankshaft
Remove crankshaft assembly with the Crank-
case Separating Tool.
Use two hexagon bolts (P/No.90890-01305).
1. Crankcase separating tool
fcSPSM
'•'•'••ifX
% > *
ft:
i
3-6