Cylinder Head; Chassis; Brake And Wheel (Front Rear) - Yamaha QT 50F Service Manual

Table of Contents

Advertisement

1 Oil level gauge
2. Oil warning light
3 Oil warning light check switch (Main switch)
4
Battery
2. Transmission
a. Replace the transmission oil once a
year.
1. Oil filler cap
Recommended oil:
Yamalube 4-cycle oil or
SAE10W/30"SE" motor oil
b. A drain plug is located on the bottom of
the right crankcase cover. With the en-
gine warm, remove the plug and drain
oil. Re-install plug and add fresh oil.
Transmission drain plug torque:
2m-kg(14ft-lb)
Transmission oil quantity:
Total (dry): 350 cc (0.37 US. qt)
Exchange:
300 cc (0.32 US. qt)
E. Cylinder Head
Check torque of cylinder head holding nuts.
Tighten in a crisscross pattern.
Cylinder head nut torque:
1.0m-kg(7.0ft-lb)
2-4. CHASSIS
A. Brake and Wheel (Front, Rear)
1. Inspection and adjustment of brakes
Check the free play of both brake lever.
If the free play is off the specification,
make an adjustment by turning adjuster
and lock nut.
Front
10 ~ 20 mm
1
2; (0.4 - 0.8 in)
1. Adjuster
2. Lock nut
Rear
10 ~ 20 mm (0.4 - 0.8 in)
1 Adjuster
2. Lock nut
si-itUj't-S
-..';: •
i
Mi
f
i
HHf
m
m
<
>
mm
l — - i ; . " ' t f
s - y i
mm
mm
Hi
if
. ' £ ?
Ir.vir.
Jfisi*
•hffi f ej
1. Drain plug
2-6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents