AEG CTV 4889 Instruction Manual page 68

English
68
Overview of the main menu
System settings
05-CTV 4889_GB.indd 68 05-CTV 4889_GB.indd 68
General Setup (1)
Audio Setup Page (2)
Dolby Digital Settings (3)
Preference Page (4)
Password Setup Page (5)
DVB-T Settings (6)
NOTE:
Some of the menu settings are only available in stop mode (depen-
ding on the DVD).
TV Display
Here you can adapt the output of the DVD-Player to the TV-aspect.
Concerning the background: If you do not have a wide screen TV the
TV-aspect will be 4:3. However, most feature fi lms have an aspect of 16:9,
the image is therefore too wide for the TV-screen.
Here you can specify how the replay of the fi lm is to be adapted to the
playback device:
4:3 Panscan: You will only see the middle section of the fi lm. The bor-
ders will be cut off .
4:3 Letterbox: You will see the complete width of the fi lm. The fi lm is
thus reduced in size, whereby black bars appear below and above the
fi lm
16:9: Select this option if you use a wide screen TV for replay. Please
note that fi lms, that have been recorded with TV-aspect 4:3 can still
be replayed using aspect 4:3. This means, that replaying this fi lm will
not require the complete wide screen area of the television.
NOTE: The setting „4:3 Panscan" is not supported by all DVDs.
Angle Mark (Camera Angle)
If the DVD contains sequences recorded from diff erent camera angles you
can use the ANGLE button (Fig. 3/13) to select the various camera angles.
This function is only available if the DVD contains scenes with various
camera angles.
Before you can use this function it has to be activated.
On: The angle symbol is shown on the screen.
Off : No angle symbol is shown on the screen.
OSD Language
Here you can select the language of the on-screen displays.
08.09.2008 9:02:38 Uhr 08.09.2008 9:02:38 Uhr