Setting Up And Connecting - AEG CTV 4889 Instruction Manual

Defect
Unpacking
Setting up
05-CTV 4889_GB.indd 51 05-CTV 4889_GB.indd 51
If the machine should become defective at some point:
If the power supply cable for this appliance is damaged, it must be
replaced by the manufacturer or his customer services, in order to
avoid hazards.
Should fl uid have seeped into the player or if the player has been
dropped down or damaged in any other way, the player must be exa-
mined by an authorized dealer. Disconnect the player from the power
supply and consult an authorized dealer.

Setting up and connecting

Unpack the appliance and all accessories and check that the contents are
complete.
ATTENTION:
Always transport/send the player in its original packaging to prevent
it from being damaged. Keep the packaging for this purpose. Dispose
of unnecessary packaging material in accordance with the regulations
applicable in your country.
NOTE:
Get in touch with your dealer immediately if you notice damage caused
by transport.
1. Place the player on a stable, heat resistant, horizontal and level
surface. Keep a distance of at least 10 cm from walls and objects.
2. Connect the device to a properly installed power socket.
3. If present, remove the protective fi lm from the device/LCD screen.
English
51
08.09.2008 9:02:34 Uhr 08.09.2008 9:02:34 Uhr