Troubleshooting - AEG CTV 4889 Instruction Manual

English
78

Troubleshooting

Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault
yourself.
Fault
The power supply
light does not light
No image displayed
on screen
No response when
pressing button
05-CTV 4889_GB.indd 78 05-CTV 4889_GB.indd 78
Band
Here you can set the corresponding frequency band.
Position
Here you can select the channel whose settings you wish to change.
Skip
In this menu you can determine whether the current channel should be
skipped when switching over.
Off : The current channel is not skipped.
On: The current channel is skipped.
Possible cause
No power supply
no power supply/ mains switch
switched off
During operation with a
television set:
Video cable not correctly
connected
no DVD/CD inserted
DVD/CD not compatible
DVD/CD incorrectly placed in
CD/DVD-tray
CD/DVD is dirty
CD/DVD is damaged
Incorrect settings
The child protection system is
activated
The AV IN/OUT switch (Fig.
2/24) is turned to „IN".
Power supply problem or static
charging of appliance
Solution
WARNING:
Before searching for the fault, please turn the device off .
During battery operation: check whether the battery is
changed.
During mains adapter operation: Put the mains plug in
correctly, if necessary, check the socket is working with
another appliance.
Switch the player on by the mains switch (Fig. 2/30).
WARNING:
Before searching for the fault, please turn the device off .
Check the correct fi t of the Video cable. Make sure that the
jacks are tightly in the sockets.
Insert a CD/DVD.
Use only compatible media.
Turn the CD/DVD around.
Clean the CD/DVD around.
Use a diff erent CD/DVD.
Check the settings of your DVD-Player.
Deactivate the child protection.
Turn the AV IN/OUT switch to „OUT".
Switch off the main switch and pull out the mains plug. Insert
the mains plug into the socket and switch the player on again.
08.09.2008 9:02:42 Uhr 08.09.2008 9:02:42 Uhr