Siemens LI67SA670 Instructions For Installation And Use Manual page 17

Installation
en
Carefully remove the appliance.
3.
16
Screw in the filler strip fully.
4.
Reinsert the springs and fastening bolts.
5.
The mounting pieces on the left and right of
Note:
the appliance must be able to move.
Final fitting stage
Slide the appliance up into place.
1.
Lock the fastening bolts on the left and right.
2.
Fit the protective caps on the left and right.
3.
Establish the electrical connection.
4.
The extractor hood's housing can be concealed
Note:
within the upper cabinet. In doing so, you must observe
the following:
The intermediate floor must not be placed on the
■
extractor hood's housing.
The front panel must not be secured to the housing.
■
Access must be available in order to change the
■
filter and for the after-sales service.
¨
©
ª