Konica Minolta bizhub C550 User Manual page 31

Overview of the User Box functions
No.
5
6
7
8
9
10
11
12
13
14
15
16
Downloaded From ManualsPrinter.com Manuals
C550
Part name
[Utility/Counter] key
[Reset] key
[Interrupt] key
[Stop] key
[Proof Copy] key
[Start] key
Data indicator
[C] (clear) key
Keypad
[Help] key
[Enlarge Display] key
[Accessibility] key
Description
Press to display the Utility screen and the Meter
Count screen.
Press to clear all settings (except programmed set-
tings) entered in the control panel and touch panel.
Press to enter Interrupt mode. While the machine
is in Interrupt mode, the indicator on the [Interrupt]
key lights up in green and the message "Now in In-
terrupt mode." appears on the touch panel. To
cancel Interrupt mode, press the [Interrupt] key
again.
Pressing the [Stop] key during scanning temporar-
ily stops the scan operation.
Press to print a single proof copy to be checked
before printing a large number of copies.
Press the [Proof Copy] key before scanning or cop-
ying, the result can be viewed on the touch panel.
!
Detail
This key cannot be used if the [User Box]
key was pressed to save a document.
To preview a document being saved in a
user box, press the [Fax/Scan] key. For
details on previewing, refer to the User's
Guide [Network Scanner Operations].
Press to start scanning. When this machine is
ready to begin to scan, the indicator on the [Start]
key lights up in blue. If the indicator on the [Start]
key lights up in orange, the operation cannot be
started.
Press to restart a stopped job.
Flashes in blue while a print job is being received.
Lights up in blue when data is being printed.
Press to erase a value (such as the number of cop-
ies, a zoom ratio, or a size) entered using the key-
pad.
Use to type in the number of sets to be copied.
Use to type in the zoom ratio.
Use to type in the various settings.
Press to display the Help screen. From this screen,
descriptions of the various functions and details of
operations can be displayed.
Press to enter Enlarge Display mode. If authentica-
tion is performed with PageScope Authentication
Manager, it does not enter Enlarge Display mode.
Press to display the screen for specifying settings
for user accessibility functions.
1
1-9