Cleaning & Maintenance - Russell Hobbs RH60GH402B Instruction Manual

Cleaning and Maintenance:
Cleaning the burners:
1. Remove the burner cover and spreader by pulling them upwards and away
from the hob.
2. Soak them in hot soapy water.
3. Clean them before drying them carefully, ensuring that the flame holes are
clean and completely dry.
4. Wipe the fixed parts of each burner with a damp cloth and dry them
afterwards.
5. Gently wipe the ignition device and a damp cloth and dry them carefully,
ensuring they are clean and completely dry.
6. Before placing the burners back on the hob you must ensure that the injector
is not blocked.
Burner
cover
Flamer
spreader
Burner
cup
Ignition
sparkers
Flame failure
device
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcare.co.uk
20
1. Place the flame spreader on to the
burner cup so that the ignition
device and the flame failure device
extend through their respective
holes in the flame spreader (the
flame spreader must click into place
correctly).
2. Position the burner cover onto the
flame spreader so that the retaining
pins fit into the their respective
recesses.