Storage; Assistance - Philips Norelco S5390 Manual

ENGLISH
26
C
5 Place a new shaving head in the holder.
Make sure the projections of the shaving head
fit exactly into the recesses on the shaving head
holder.
C
6 Hold the shaving head holder in your hand
and place the retaining ring on the shaving
1
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
2
Do not place the shaving head holder on a
surface, as damage may occur.
7 Repeat this process for the other two
cutters and combs.
C
NOTE: Each retaining ring has two recesses and
two projections that fit exactly in the projections
and recesses of the shaving head holder. Make sure
you hear a 'click' indicating the retaining ring is fixed
into place.
C
8 Reinsert the hinge of the shaving head
holder into the slot of the shaving unit.
Close the shaving head holder (click).
C
9 To reset the shaver, press and hold the On/
Off button for approximately 7 seconds.
7 sec.
This shaver has no other user-serviceable parts.
For assistance, call 1-800-243-3050.

Storage

◗ Be sure shaver is turned off. Remove cord
from outlet before storing in a safe, dry
location where it will not be crushed, banged,
or subject to damage.
◗ Do not wrap power cord around shaver when
storing.
◗ Store cord in a safe location where it will not
be cut or damaged.
◗ Do not place or store shaver where it can fall
or be pulled into a tub or sink, water or other
liquid while plugged in.
C
◗ Put the Protective Cap on shaver to protect
heads.

Assistance

◗ For assistance, visit our website:
www.philips.com/support or
call toll free 1-800-243-3050
◗ Online information is available 24 hours a day,
7 days a week.
ENGLISH
27