Philips Norelco S5390 Manual page 12

ENGLISH
22
1 Turn shaver OFF.
C
2 Press the shaver head release button and
open the shaving unit.
C
3 Pull the shaving head holder off the
bottom part of the shaving unit.
C
4 Turn the retaining ring counterclockwise
2
(1) and lift it off the shaving head (2).
1
C
5 Remove one shaving head from the shaving
head holder. Remove the cutter from the
comb.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong comb, it
may take several weeks before optimal shaving
performance is restored.
C
6 Clean the cutter and comb under warm
tap water.
C
7 After cleaning, place the cutter back into
the comb with the cutter legs pointing
downwards.
C
8 Put the shaving head back into the shaving
head holder.
Make sure the projections of the shaving head
fit exactly into the recesses on the shaving head
holder.
C
9 Hold the shaving head holder in your hand
and place the retaining ring on the shaving
1
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
2
Do not place the shaving head holder on a
surface, as damage may occur.
10 Repeat the process for the other two
cutters and combs.
C
NOTE: Each retaining ring has two recesses and
two projections that fit exactly in the projections
and recesses of the shaving head holder. Make sure
you hear a 'click' indicating the retaining ring is fixed
into place.
C
11 Reinsert the hinge of the shaving head
holder into the slot of the shaving unit.
Close the shaving head holder (click).
ENGLISH
23