Cleaning - Philips Norelco S5390 Manual

ENGLISH
20

Cleaning

◗ Always clean your shaver after each use.
◗ Regular cleaning guarantees better shaving
results.
◗ Never remove or replace shaving unit while
motor is on.
◗ Do not apply pressure to shaving head combs.
Do not touch shaving heads with hard objects
as this may dent or damage precision-made
slotted combs.
◗ Do not use shaver if shaving head combs are
damaged or broken. Facial injury may occur.
◗ Do not use abrasives, scourers or aggressive
liquids such as gasoline or acetone to clean
the shaver.
◗ Never dry the shaving unit with a towel or
tissue as this may damage the shaving heads.
Cleaning the Shaving Unit
The shaving heads may be quickly cleaned after
each use by rinsing with hot water. Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ While rinsing shaving heads, water may drip
out of the base of shaver. This is a normal
occurrence.
C
1 For best results rinse the shaving unit by
running under hot water for a few minutes.
C
2 Press the Shaver Head Release Button to
open the shaving unit.
C
3 Rinse the shaving head holder under hot
tap water for 30 seconds.
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
4 Carefully shake off excess water and let
the shaving head holder air dry completely.
5 Close the shaving head holder. You will
hear a 'click'.
Extra-thorough cleaning method
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
ENGLISH
21