Table of Contents
Advertisement
62
E
CHECKING THE NUMBER OF
REMAINING PICTURES
When you turn on the power, the number of remaining
pictures is shown on the control panel.
When the number reaches 0, the camera emits a beep
sound and the Condition indicator LED blinks every time
the lens barrier is opened.
The number of remaining pictures varies depending on the
selected resolution setting.
Because the amount of data used varies depending on the
subject, more pictures than the number shown may be
photographed.
HQ is initially set to 1. HQ1 or 2 can only be selected from
a personal computer using the utility software. Refer to the
utility software's online manual for details.
Advertisement
Table of Contents
