I INSERTING THE SMARTMEDIA CARD
Check that the lens barrier is closed and both the monitor and the orange lamp
are off.
Caution
1
2
3
➜
➜
Card
insertion
direction
marking
1 Open the card cover.
2 Insert the card in the direction shown in the figure.
There is a mark inside the card cover, indicating the direction in which the card should
be inserted.
3 Close the card cover securely until it clicks.
I SETTING THE DATE AND TIME
1 Press the
button to turn the monitor on.
2 Press the
button to display the menu.
3 Select [SETUP] using the
/
buttons and press the
button.
4 Select [
] using the
/
buttons and press the
button.
5 Select the date format “Y-M-D (Year-Month-Day)”, “M-D-Y (Month-Day-Year)” or “D-
M-Y (Day-Month-Year)” using the
/
buttons and press the
button.
6 Set the first figure using the
/
buttons, and then proceed to the next figure
using the
button.
7 Repeat the above procedure until the date and time settings are adjusted.
8 Press the
button when the clock reaches 00 seconds.
9 Press the
button to turn the monitor off.
I TAKING PICTURES
To turn the camera on : Open the lens barrier. (You are now ready to take pictures.)
To turn the camera off : Close the lens barrier.
Never attempt to open the card cover or remove the card or batteries while the
orange lamp is blinking. Otherwise, the image data on the card may be destroyed.
Caution
Remember that it is impossible to restore image data once it has been destroyed.
Press the shutter button halfway A and then press it fully B.
Note
A
B
➜
I
FLASH (
)
1 Open the lens barrier.
2 Check the current flash mode by pressing the
button.
3 To change the setting, press the
button until the appropriate flash mode is displayed.
Setting of the flash mode is completed.
Flash mode settings
Note
Auto (AUTO)
Automatically fires in low light or backlight
conditions.
Red-eye (
)
Reduces the phenomenon of the subject’s eyes
appearing red in the image.
Fill In ( )
Fires regardless of the light conditions.
Flash Off (
)
Does not fire even in dark conditions.
Night Scene (
)
For taking pictures at night.
Night Scene/Red-eye (
)
For taking pictures of people against a night
background.
I
MACRO (
)
This mode is for taking close-up pictures at distance of 10cm-50cm (4in-1.6ft).
1 Open the lens barrier and press the
button to display the current setting [OFF].
2 Press the
button again to set the Macro (
) mode.
3 Take a picture by looking at the monitor.
I
DIGITAL TELE
This mode enables you to take pictures in six magnifications: 1.6×, 2×, 2.5×, 3.2×, 4× and 5×.
1 Open the lens barrier and press the
button to turn the monitor on.
2 The image is magnified in the sequence [1.6× → 2.0× → 2.5× → 3.2× → 4.0× → 5.0×]
each time the
button is pressed.
The image is zoomed out in the sequence [4.0× → 3.2× → 2.5× → 2.0× → 1.6× →
OFF] each time the
button is pressed.
3 Take a picture by looking at the monitor.
The image quality needs to be set to SQ2 to magnify 3.2×, 4× or 5×.
Note
I
SELF-TIMER ( )
1 Press the
button with the lens barrier open to display the Camera menu.
2 Select [CAMERA] using the
/
buttons and press the
button.
3 Select [DRIVE] using the
/
buttons and press the
button.
4 Select [
SELF-TIMER] using the
/
buttons and press the
button.
5 Press the
button again to exit the menu.
6 Press the shutter button.
The self-timer lamp on the front of the camera lights up for 10 seconds and then blinks
for 2 seconds, before the picture is taken.