1. Disable the built-in battery. See "Disabling the built-in battery" on page 119.
2. Close the computer display, and turn the computer over.
3. Remove the screws
cover
3
.
4. Reinstall the new base cover
5. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing the solid-state drive
Before you start, print these instructions. Read the important safety information first.
Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
122
ThinkPad X1 Carbon User Guide
1
and loosen the screws
1
, tighten the screws
2
that secure the base cover. Then remove the base
2
, and then reinstall the screws
3
.