1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo PC Experience ➙ Lenovo Tools ➙
Enhanced Backup and Restore. The Rescue and Recovery program opens.
2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow.
3. Click the Restore your system from a backup icon.
4. Follow the instructions on the screen to complete the recovery operation.
For more information about performing a recovery operation from the Rescue and Recovery workspace, see
"Using the Rescue and Recovery workspace" on page 111.
Using the Rescue and Recovery workspace
The Rescue and Recovery workspace resides in a protected, hidden area of your solid-state drive that
operates independently from the Windows operating system. It enables you to perform recovery operations
even if you cannot start the Windows operating system. You can perform the following recovery operations
from the Rescue and Recovery workspace:
• Rescue files from your solid-state drive or from a backup
The Rescue and Recovery workspace enables you to locate files on your solid-state drive and transfer
them to a network drive or other recordable media, such as a USB device or a disc. This solution is
available even if you did not back up your files or if changes were made to the files since your last backup
operation. You also can rescue individual files from a Rescue and Recovery backup located on your local
solid-state drive, a USB device, or a network drive.
• Restore your solid-state drive from a Rescue and Recovery backup
If you have backed up your solid-state drive using the Rescue and Recovery program, you can restore the
solid-state drive from a Rescue and Recovery backup, even if you cannot start the Windows operating
system.
• Restore your solid-state drive to the factory default settings
The Rescue and Recovery workspace enables you to restore the complete contents of your solid-state
drive to the factory default settings. If you have multiple partitions on your solid-state drive, you have
the option to restore the factory default settings to the C: partition and leave the other partitions intact.
Because the Rescue and Recovery workspace operates independently from the Windows operating
system, you can restore the factory default settings even if you cannot start the Windows operating
system.
Attention: If you restore the solid-state drive from a Rescue and Recovery backup or restore the solid-state
drive to the factory default settings, all files on the primary solid-state drive partition (usually drive C:) will be
deleted in the recovery process. If possible, make copies of important files. If you are unable to start the
Windows operating system, you can use the rescue files feature of the Rescue and Recovery workspace to
copy files from your solid-state drive to other media.
To start the Rescue and Recovery workspace, do the following:
1. Make sure that the computer is turned off.
2. Repeatedly press and release the F11 key when turning on the computer. When you hear beeps or
see a logo screen, release the F11 key.
3. If you have set a Rescue and Recovery password, type your password when prompted. The Rescue
and Recovery workspace opens after a short delay.
Note: If the Rescue and Recovery workspace fails to open, see "Solving recovery problems" on
page 113.
4. Do one of the following:
• To rescue files from your solid-state drive or from a backup, click Rescue files and follow the
instructions on the screen.
.
Chapter 9
Recovery overview
111