Saeco HD8854 Operating Instructions Manual page 37

32
maIntenanCe
4
EMPTY TRAY UNDER
BREW GROUP
OK
Empty the drip tray placed under the
dispensing spout (page 36 - fig. 2) and
then replace it on the machine.
Then, press the "OK" button.
7
STEP 1/2 DESCALING
PAUSE
The descaling cycle is activated.
The bar shows the cycle's progress.
A default amount of water is needed for the rinsing step. This allows performing an ideal rinse cycle to ensure the best conditions to
brew products. The message about filling the tank for the rinse cycle is normal, as it is part of the procedure.
10
RINSE TANK &
FILL WITH WATER
OK
Rinse the water tank and refill it with
fresh drinking water.
Then, press the "OK" button.
Downloaded from CoffeeMachineManual.com Manuals
5
FILL HALF CARAFE
WITH WATER. INSERT
IN BREW. POSITION
OK
Fill half the carafe with fresh water
(page 34 - fig. 7).
Insert the carafe and place it in the
brewing position. Then, press the "OK"
button.
8
STEP 1/2 DESCALING
PAUSE
If the containers need to be emptied,
press the "PAUSE" button.
Then, press the "START" button when the
container has been emptied and replaced.
11
EMPTY TRAY UNDER
BREW GROUP
OK
Empty the drip tray placed under the
dispensing spout (page 36 - fig. 2) and
replace it back onto the machine.
Then, press the "OK" button.
6
PLACE A CONTAINER
UNDER HOT WATER &
CARAFE DISP SPOUT
OK
Place a container under the dispensing
spout and a container under the hot
water wand.
Then, press the "OK" button.
9
RINSE TANK &
FILL WITH WATER
OK
At the end of the first step, when the
descaling solution is finished, the
machine will require a tank rinse.
12
FILL HALF CARAFE
WITH WATER. INSERT
IN BREW. POSITION
OK
Completely empty the carafe (page 34 -
fig. 7) and fill it with fresh water.
Insert the carafe in the brewing position,
and then press the "OK" button.