General Tools; Ss-100 - Nokia RM-333 Service Manual

RM-333; RM-334; RM-335
Service Tools and Service Concepts

General tools

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-333; RM-334; RM-335. For the correct use of the service devices, and the best effort of
workbench setup, please refer to various concepts.
Issue 2

SS-100

The camera removal tool SS-100 is used to remove/attach a camera
module from/to the camera socket of the phone PWB.
SS-157
SS-157 is used for domesheet alignment.
RJ-166
RJ-166 is a jig used for soldering and as a rework jig for the engine
module. It is used together with the ST-53 stencil.
RJ-209
RJ-209 is used as a rework jig for the WLAN 4.0 module
This stencil takes the WLAN 4.0 module for spreading soldering paste
onto the component. This must be used together with the ST-64
rework stencil.
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Camera removal tool
Domesheet
alignment jig
Rework jig
Rework jig
Page 2 –7