General Tools - Nokia RM-235 Service Manual

RM-235
Service Tools and Service Concepts

General tools

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-235. For the correct use of the service devices, and the best effort of workbench setup,
please refer to various concepts.
Issue 1
SS-184
SS-184 is used for removing sub LCD window assy without
disassembling the phone.
ST-69
ST-69 is a rework stencil used with RJ-219.
RJ-196
RJ-196 is a rework jig used when servicing the BTHFM (D6000) module.
It is used together with rework stencil ST-37.
RJ-209
RJ-209 is used as a rework jig for the WLAN 4.0 module
This stencil takes the WLAN 4.0 module for spreading soldering paste
onto the component. This must be used together with the ST-64
rework stencil.
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Window release tool
Rework stencil
Rework jig
Rework jig
Page 2 –7