Filter system assembly
Water supply fitting
Filtered water faucet for sink or countertop mounting
Color coded 3/8" tubing to make all needed connections
Filter change drip tray
Materials and Tools Needed
NOTE: Gather the required tools before starting installation. Read and
Slotted and Phillips screwdrivers
Pliers and adjustable jaw wrench
Tubing cutter
Electric drill and 1-1/4" drill bit if mounting hole is needed for the faucet
IMPORTANT: To avoid damaging the sink, consult a qualified plumber or
Typical Undersink Installation
Locate the water filter housing on the cold water supply pipe, under the kitchen and/or bathroom sink, to
filter the cold drinking water. Refer to the following drawing.
SINK
water supply
fitting
HOT
shutoff valve
IMPORTANT: Allow adequate open space
behind the water filtration
system to avoid sharp bends
or kinks in the tubing.
Parts of the System
follow the instructions provided with any tools listed here.
installer for drilling procedures in porcelain or stainless steel.
filtered water
faucet
Blue Tubing
WATER OUT
COLD
Yellow Tubing
WATER IN
Blue Tubing
WATER OUT
6
filter change
drip tray
FIG. 2