Fax Menu List - Epson OFFICE 620F Basic Operation Gude

Fax Menu List


Press x again to finish setting.
Menu items and values may differ depending on the region.
x
Fax settings menu
Resolution *¹ Standard, Fine, Photo
Contrast *¹ -4 to +4
Send Fax Later Off, On
Fax Mode Sending, Pollrecv
Fax Settings Print Report
Speed Dial Setup
Group Dial Setup
Scan & Print
Setup *²
Communication
Check Fax Connection
Header
Restore Default & 18
R
Settings
Network See your online Network Guide for details.
Settings *¹⁵
Maintenance
& 54
R
*1 Settings for transmitted faxes.
*2 Settings for received faxes.
*3 Prints or displays the communication log.
*4 Prints a communication log for the previous transmission or
the previous polling results received.
*5 Reprints from the latest fax received. When the memory is
full, the oldest faxes are erased first.
*6 Prints the protocol for the latest communication.
*7 Indicates whether or not to reduce received faxes larger than
Fax Log *³, Last
A4-size to A4, or prints them at their original size on multiple
Transmission *⁴, Speed
sheets.
Dial List, Group Dial
*8 Indicates whether or not to print a report for the previous
List, Reprint Faxes *⁵,
transmitted fax. Select On Error to print reports only when
Protocol Trace *⁶
an error occurs. Select On Send to print reports for every fax.
Create, Edit, Delete
*9 Indicates the type of answer ring pattern you want to use to
Create, Edit, Delete
receive faxes. To select an option other than All (or Off), you
Resolution, Contrast,
must set up your phone system to use different ring patterns.
Auto Reduction *⁷, Last
This option may be On/Off depending on the region.
Transmission Report *⁸
*10 Indicates whether or not to use Error Correction mode to
DRD *⁹, ECM *¹⁰, V.34 *¹¹,
automatically correct fax data sent/received with errors due
Rings to Answer *¹²,
to the line or any other problems. Color faxes cannot be
Dial Tone Detection *¹³,
sent/received when ECM is off.
Dial Mode *¹⁴
*11 Indicates the speed at which you transmit and receive faxes.
On is 33.6 kbps and Off is 14.4 kbps.
*12 Depending on the region, this setting may not be displayed.
Fax Header, Your Phone
Number
*13 When this is set to On, the product starts dialing after it
detects a dial tone. It may not be able to detect a dial tone
when a PBX (Private Branch Exchange) or a TA (Terminal
Adapter) is connected. In that case, set to Off. However,
doing so may drop the first digit of a fax number and send
the fax to the wrong number.
*14 Indicates the type of phone system to which this product is
connected. Depending on the region, this menu may not be
displayed.
*15 WorkForce 325 only.