Control Panel - Vitamix PROFESSIONAL SERIES 300 Owner's Manual

5
1. On/Off Switch: The On/Off (or Power) Switch is on the right-hand side of the
machine base. The On/Off Switch controls the power to the machine. BEFORE
moving the On/Off Switch to the On (I) position, make sure the Start/Stop Switch
is in the Stop ( ) position and the Variable Speed Dial is to the far left, pointed
at number 1. Move the On/Off Switch to the Off position whenever the machine will
be left unattended.
2.
On/Off Indication: When the Pulse ( ) and Start (
indicates that the machine is plugged in, the On/Off Switch is powered On and
power is flowing.
3.
Start (
Speed Dial is to the far left, pointed at number 1. Lifting the Start/Stop Switch to
the Start Position (
process. Pressing down on the Start/Stop Switch to the Stop Position ( ) will
stop the blending process.
4. Variable Speed Dial: The Variable Speed Dial selects blade rotation speeds from
1 to 10 (low to high). Always begin the blending process with the Variable Speed
Dial set to 1. Make sure that the On/Off Switch is in the On (I) position. Move the
Start/Stop Switch to the Start (
desired speed setting. To stop the machine, rotate the Variable Speed Dial back
to 1 and move the Start/Stop Switch back to the Stop ( ) position. If the Variable
Speed function is not working and the blades only rotate at the lowest speed
(Variable Speed 1) the blender must be reset. Refer to Troubleshooting on
Page 18.
5. Pulse Switch ( ): Pressing down on the Pulse Switch will cause the machine to
blend at the speed setting shown on the Variable Speed Dial for as long as the
Pulse Switch is held down.
34
CO N T R O L PA N E L
2
4
)/Stop ( ) Switch: Before starting, always make sure that the Variable
) starts the rotation of the blades and begins the blending
3
) symbols brighten, this
) position. Rotate the Variable Speed Dial to the
1