Recording – Brightness/Exposure - Olympus C-2100 Ultra Zoom Instructions Manual

RECORDING—brightness/exposure
Compensating for lighting conditions —
Exposure compensation
You can adjust exposure manually by +/– 2 (in increments of approx. 1/3). If
you want a white object to appear as white as possible, adjust + to increase
the exposure. If you want a black object to appear as black as possible,
adjust – to decrease the exposure.
1
Set the Mode dial to P, A, S, S-Prg
or .
The exposure setting will be
displayed.
2
Press on the Arrow pad for +
adjustment
adjustment.
When exposure is set to any value
other than 0,
the control panel.
Images
become
darker
Unless OFF is selected in All Reset, the setting will be canceled when the
power is turned off (p. 148).
If the subject is mostly dark, the exposure compensation does not function
effectively. In such a case, display the recorded picture and check the
brightness.
You cannot correct the amount of light in this mode. To adjust brightness,
refer to page 109.
and for
is displayed on
Images
become
lighter
Note:
2
–
Exposure compensation
P F2.8 1/200 + 2.0
Menu (still picture recording mode)
1
99