Table of Contents
Advertisement
RECORDING—Others
Taking pictures in sequence — Sequential mode
Use this mode to take pictures in sequence. When the shutter release button
is held down, the camera will take pictures in sequence. Picture-taking will
stop when you release your finger from the button. A max. 2 frames/sec. is
available in this mode. (in all record modes except TIFF) Press
change the function of this mode. The sequential mode includes:
Single-picture Shooting (no display): Takes only one picture when you
press the shutter button. (Initial setting)
Sequential Shooting (
(exposure), and white balance are locked at the first frame. Up to 5
frames can be taken in sequence at once. The approximate recording
speed during Sequential mode and the number of still pictures that can
be stored is shown below.
AF sequential Shooting (
brightness (exposure), and white balance are metered and adjusted in
each frame. The speed of picture-taking slows down. Up to 5 frames can
be taken in sequence at once. The approximate recording speed during
Sequential mode and the number of still pictures that can be stored is
shown below.
Self-timer/remote-control (
control. See P.119 to 121 for further information.
Auto bracket (BKT): Takes pictures in sequence. The camera will adjust the
brightness (exposure) in each frame. Focus and white balance are
locked at the first frame. See P.102 for further information.
Recording speed during Sequential mode and number of still pictures
that can be stored
Record mode
TIFF
SHQ
HQ
SQ (640 X 480)
When using the flash, the speed of sequential shooting slows down, to allow
the flash to recharge.
): Takes pictures in sequence. Focus, brightness
): Takes pictures in sequence. Focus,
): Takes pictures with the self-timer/remote-
Recording speed during
Sequential mode
Not available.
1.5 frames/sec
1.8 frames/sec
2 frames/sec
Note:
Number of storable
still pictures
approx. 5
approx. 16
approx. 86
117
to
Hide quick links:
Advertisement
Table of Contents
