Table of Contents
Advertisement
RECORDING—Others (Cont.)
Sequential shooting/AF sequential shooting
1
Set the record mode to any mode
other than TIFF. If the record mode
is set to TIFF, the Sequential mode
is not available. (P. 104).
2
Make sure that the mode dial is
switched to P, A, S, M or S-Prg.
3
Press
until
mode) or
mode) is displayed.
4
Press the shutter button to take
pictures.
If the battery power runs out during
sequential shooting and the battery
check mark blinks, shooting stops.
Pictures already taken will be
written to the card.
Red-eye reduction mode
When using an external flash, set the speed fast enough to fire for each
shot during sequential shooting.
Since the slowest shutter speed in the sequence mode is set to 1/30
second to prevent blurring from camera movement, the resulting picture
may be darker than expected.
Unless OFF is selected in All Reset, settings will not be cancelled when the
power is turned off. (P. 148)
118
(sequential
(AF sequential
Note:
cannot be set during the sequential mode.
Control panel
Record mode
2
3
Control panel
Sequential shooting mode
4
Hide quick links:
Advertisement
Table of Contents
