Olympus Camedia C-2 Reference Manual page 48

5
Select [SHQ], [HQ], [SQ1] or
[SQ2] using the
buttons and press the
button.
The image quality setting is now
completed.
Press the
menu.
6
Take a picture.
Note • The image quality setting returns to HQ (default setting) when
the clear settings value is [RESET] and the lens barrier is
closed. See "Clear settings" (
• The number of recordable images varies depending on the
image quality setting.
• The number of pixels is almost the same for HQ and SHQ, but
the compression rate is lower for SHQ, resulting in clearer
images when enlarged. SHQ also takes longer to record and
play back images than HQ.
• When you select a image quality with higher image quality
than the current mode and the number of recordable images
remaining is low, the monitor may display a warning mark (see
below). This means that there is not enough memory on the
SmartMedia card for the selected image quality.
Select another image quality.
/
button again to exit the
Warning mark
IMAGE QUALITY
p.75).
47