Disassembly Instructions; Cabinet Disassembly - Aiwa XD-DV485 Service Manual

www.freeservicemanuals.info
DISASSEMBLY -1/2

CABINET DISASSEMBLY

1. Top Case
1. Release 7 screws (A). (See Fig. 2-1)
2. Lift the top case with holding the back of it,
and remove it in the direction of the arrow.
(A)
Top Case
(A)
2. Tray Door
1.The AC cord is connected and a power switch is
turned on.
2.Eject the disc tray.
3.Lift up the tray door in the direction of the arrow.
Tray Door
Disc Tray
(A)
(A)
(A)
Fig. 2-1
Fig. 2-2
Published in Heiloo, Holland.
3. Front Panel (XD-DV480)
1. Eject the disc tray. (See Fig. 2-2)
2. Remove the tray door. (See Fig. 2-2)
3. Pull the front panel toward you while pressing
7 stoppers to disengage, and remove the front
panel. (See Fig. 2-3)
(A)
(A)
Stopper
Stopper
Front Panel
3. Front Panel (XD-DV485)
1. Eject the disc tray. (See Fig. 2-2)
2. Remove the tray door. (See Fig. 2-2)
3. Remove the three knobus and three springs.
4. Pull the front panel toward you while pressing
7 stoppers to disengage, and remove the front
panel. (See Fig. 2-4)
Stopper
Spring
Buttom
Stopper
Front Panel
-6-
Stopper
Fig. 2-3
Stopper
Fig. 2-4
1/3/16