Table of Contents
Advertisement
DISASSEMBLY INSTRUCTIONS
CAUTION BEFORE STARTING SERVICING
Electronic parts are susceptible to static electricity and may easily damaged, so do not forget to take a proper
grounding treatment as required.
Many screws are used inside the unit. To prevent missing, dropping, etc. of the screws, always use a
magnetized screw driver in servicing. Several kinds of screws are used and some of them need special
cautions. That is, take care of the tapping screws securing molded parts and fine pitch screws used to secure
metal parts. If they are used improperly, the screw holes will be easily damaged and the parts can not be
fixed.
CABINET DISASSEMBLY
1. Top Case
1) Release 7 screws (A). (See Fig-1)
2) Lift the top case with holding the back of it, and remove
it in the direction of the arrow.
Top Case
(A)
(A)
2. Tray Door
1) Eject the disc tray.
2) Lift up the tray door in the direction of the arrow.
(A)
(A)
(A)
(A)
Fig-1
Tray Door
Disc Tray
Fig-2
3. Front Panel
1) Eject the disc tray. (See Fig-2)
2) Remove the tray door. (See Fig-2)
3) Release 2 screws (B).
4) Pull the front panel toward you while pressing 7
stoppers to disengage, and remove the front panel. (See
Fig-3)
(A)
Stopper
Front Panel
5
(B)
(B)
Stopper
Fig-3
Advertisement
Table of Contents
