Disassembly Instructions - Aiwa XD-DW1 Service Manual

DISASSEMBLY INSTRUCTIONS

1. CABI, BOTTOM ASSY
(1) Remove screws A (*7) and B (*2), and remove the PLATE, BOTTOM ASSY from the unit.
B
(2) Remove the screws A (*3) on the CABI, BOTTOM ASSY side and disassemble the unit into the CABI, TOP ASSY and CABI,
BOTTOM ASSY.
(3) Remove the connectors connected to each of CN551, CN552, CN701, CN702, CN800 and CN802, and remove each of the
KNOB, SL N/P and PLATE, OPTICAL and KNOB, SL POWER knobs.
Note During Assembling:
Twist the connectors to be connected to CN551 and CN552 clockwise five times, then insert them.
Be careful of the upward and downward directions of the wiring and KNOB, SL N/P and PLATE, OPTICAL and KNOB, SL
POWER.
CONNECTOR (CN702)
CONNECTOR (CN551)
BOTTOM SIDE
KNOB, SL POWER
CABI, BOTTOM ASSY
A
CONNECTOR (CN701)
KNOB, SL N/P
A
A
PLATE, BOTTOM ASSY
CABI, TOP ASSY
A
BOTTOM SIDE
5
CONNECTOR (CN800)
CONNECTOR (CN802)
CONNECTOR (CN552)
OUT SIDE
PLATE, OPTICAL