How To Use; Cooling Only - Panasonic CS-RZ9RKR Operating Instructions Manual

How to use

To reach temperature quickly
i AUTO-X

(Cooling only)

i AUTO-X
• The unit controls set temperature according to room
temperature to accelerate room cooling.
Set
i AUTO-X
temperature
• After max 4 hours, the set temperature follows the
last set temperature setting.
• Fan speed is fi xed at AUTO, fan speed selection is
prohibited.
• During unit is off, press
with i AUTO-X mode.
• i AUTO-X mode can be cancelled by pressing the
respective button again.
To select operation mode
MODE
- For your convenience
AUTO
- To enjoy warm air
HEAT
- To enjoy cool air
COOL
- To dehumidify the environment
DRY
- To circulate air in the room
FAN
i AUTO-X - To reach temperature quickly (Cooling only)
To reach temperature quickly
POWERFUL
POWERFUL
• This operation stops automatically after 20 minutes.
To enjoy quiet operation
QUIET
QUIET
• This operation reduces airfl ow noise.
To adjust horizontal airfl ow
direction
• Manually adjustable.
6
F570019-SA0515-0_EN.indd 6 F570019-SA0515-0_EN.indd 6
-1°C
Max = 4 hours
i AUTO-X
will turn on the unit
Auto OFF/ON button
Process Black Process Black
Remote control
display
AIR CONDITIONER
MODE
AUTO
i AUTO-X
OFF/ON OFF/ON
MODE ECONOMY
TEMP TEMP
POWERFUL AIR SWING
QUIET FAN SPEED
TIMER TIMER
ON ON SET SET
1 1 2 2 3 3
OFF OFF CANCEL CANCEL
AC RC
SET CHECK CHECK CLOCK CLOCK RESET
To select fan speed
FAN SPEED
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• If i AUTO-X mode is set, fan speed is fi xed to AUTO.
To adjust fan speed, cancel i AUTO-X mode.
Use when remote control is misplaced or a
malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the button
until 1 beep is heard, then release.
• To use in HEAT mode, press and hold the button
until 1 beep is heard, then release. And press
again until 2 beeps are heard, then release.
• Press the button again to turn off.
Remote control
receiver
i AUTO-X
ECONOMY
POWERFUL
Indicator
(Green)
POWER
(Orange)
TIMER
(Orange)
i AUTO-X
(Orange)
ECONOMY
(Orange)
POWERFUL
(Orange)
QUIET
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
28/07/2015 10:30:40 AM 28/07/2015 10:30:40 AM