Plug & Play Feature - Samsung PS-42Q7HD Owner's Manual

Plug & Play Feature
When the television is initially powered on, several basic customer settings proceed automatically and subsequently.
The following settings are available.
Plug & Play
Start Plug & Play.
OK
Enter Exit
Plug & Play
Check antenna input.
OK
Enter Skip
Plug & Play
Auto Store
--
P 1 C 40 MHz
0 %
Start
Enter Skip
Plug & Play
Auto Store
--
P 1 C 40 MHz
0 %
Stop
Enter Skip
Plug & Play
Clock Set -- : --
Enter Skip
Plug & Play
Clock Set 12 : 00
Move Adjust Enter Skip
1 If the television is in standby mode, press the POWER ( ) button
on the remote control. The message to start Plug & Play is displayed.
2 Make sure that the antenna is connected to the TV.
Press the ENTER (
3 To start channel store, press the ENTER (
The search will end automatically. The TV will begin memorizing all of the
available channels.
Press the ENTER (
Press the œ or √ button to select the hour or minute.
4
Set these by pressing the ... or † button.
➢
You can enter the hours or minutes by using the numeric buttons on the
remote control.
English - 10
) button. The menu to select channels is displayed
) button.
) button to set the clock.