Add A Ram Module On Rackstation - Synology RackStation RS3614xs+ Quick Installation Manual

Add a RAM Module on RackStation

Synology offers RAM modules which allow you to expand the memory capacity of your RackStation. To install,
check, or remove your RAM module, please follow the steps below.
Install a RAM Module
1 Shut down the RackStation and disconnect all connected cables to prevent any possible damage.
2 Slide the latches shown below to release the fan cover
3 Lift and remove the fan cover.
4 To remove the screws securing the top cover, follow the steps below:
a Remove the two screws illustrated below.
8 Chapter 2: Hardware Setup