Table of Contents
Advertisement
b Remove the two screws located on the back. Then slide the top cover in the direction indicated below and
lift.
c Remove the screws of the securing bracket and remove the securing bracket to reveal the RAM slots.
Important:
Removing the cover will expose sensitive internal components to possible harm. Please avoid touching
any other components when adding or removing memory.
5 To insert the new memory module, follow the steps below:
a Release the ejectors on the memory slot by pushing them outwards.
b Align the notch on the gold edge of the module with the notch in the memory slot.
c Use two fingers to apply firm, even pressure and push the memory module downward.
d When the memory is inserted correctly, the ejectors will snap into place.
6 Replace the top cover, slide it into place, and tighten all screws.
9 Chapter 2: Hardware Setup
- Quick Links:
- Appendix B: Led Indicator Table
Hide quick links:
Advertisement
Table of Contents
