PROBLEM
Unit will not start
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.
For more information about our authorized service centers and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.BlackandDecker-la.com
TROUBLESHOOTING
POSSIBLE CAUSE
Cord not plugged in
Circuit fuse is blown
Circuit breaker is tripped
Cord or switch is damaged
ENGLISH • 21
POSSIBLE SOLUTION
Plug tool into a working outlet
Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to
blow, discontinue use immediately and
have it serviced at a BLACK+DECKER
service center or authorized servicer)
Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to
trip, discontinue use immediately and
have it serviced at a BLACK+DECKER
service center or authorized servicer)
Have cord or switch replaced at
BLACK+DECKER Service Center
or Authorized Servicer.