Advertisement
INSTALLATION HARDWARE
The System One enclosure package includes all parts and hardware
necessary for the installation of one (1) enclosure. The System Two
enclosure package includes all parts and hardware to complete the
installation of two (2) enclosures. Please verify that you have all
the required items below before beginning the installation.
Item / Description
IWS enclosure with pre-attached wallboard template
"Go" gauge, measuring 14 3/8-inches wide (365.1 mm)
Mounting bracket assembly (with centering template)
Hanging rod (11.25-inches for "A" box or 26.25-inches for "B" box)
#8, 1.25-inch wafer head screws
Wire/cable ties
Energy absorbing foam gasket strip
TOOLS FOR INSTALLATION
Below is a list of tools necessary to perform the installation of the Fathom
IWS enclosure. Depending on the specifics of your installation, you may need
additional tools, hardware and/or accessories. Enrolling a friend or coworker to
assist in lifting the enclosure will be helpful.
• Safety glasses
• Cordless drill/driver with #2 Phillips bit
• Pliers
• Wire cutters
• Permanent marker
• Masking tape (optional)
Page 8
• Tape measure (100-inch minimum)
• Drill bits
• Wire strippers
• Utility knife or scissors
• Drop cloth (optional)
Qty Included With
System One
1
1
1
1
50
3
50 foot length
Qty Included With
System Two
2
2
2
2
100
6
100 foot length
| Fathom IWS
Advertisement
