Thermostat Operation; Select System Mode; Change Temperature Setpoint - Aprilaire 8920W Owner's Manual

THERMOSTAT OPERATION

SELECT SYSTEM MODE

1.
Touch MODE to open the Thermostat
Mode screen .
1
2.
Select the desired mode .
3.
Done
Touch to save any changes .
Back
Touch to discard your changes .
The thermostat will automatically
discard your changes if one minute
elapses without touching Done .
Note: Em Heat
(Emergency Heat) is only
applicable to heat pump installations .

CHANGE TEMPERATURE SETPOINT

1.
Touch the or
the temperature setpoint . The Set
Temporary Hold pop-up will appear .
2.
Touch Done to save your changes .
See page 15 for information on temporary
and permanent holds .
2
arrows to adjust
3
1
7
2