Windows Me
WIA (Windows Image Acquisition) Driver
fEl
WIA Driver is the driver software for USB connection to Windows Me that
IS
~
required to download images into ZoomBrowser EX.
Read carefully before installing the WIA Driver:
When you have set the WIA Driver to start a particular application
program when you connect the camcorder, the program may cause an
error message similar to the following to appear: f/TWAIN data source not
found, Reinstall the scanner software.
f/
If this happens, select [WIA-
camera model] in the application program as the TWAIN device.
1.
Insert a memory card containing images into the camcorder.
2.
Connect the Power Adapter to the camcorder.
3.
Turn the POWER switch to PLAY (VCR) and move the TAPE/
CARD switch to CARD.
Wait until the card access indicator stops flashing.
4.
Connect the camcorder to the computer using the supplied
USB cable ([IJ 18).
• If the "Digital signature not found" message appears, click [Yes],
• After a few moments, a message such as f/Found New Hardware"
appears and the WIA driver will be installed.
• If you are prompted to restart the computer, restart the computer.
• When installation is complete, the Scanners and Cameras Wizard starts.
See
Downloading Images
(0 20) for how to start ZoomBrowser EX and
download images to the computer.
17