Canon ZR 90 Instruction Manual page 122

, . a
Refer to the instruction manual of each printer for information on which
~
interface cable to use with the camcorder.
a
We recommend powering the camcorder from a household power source.
a
Refer also to the instruction manual of the respective printer.
IElI
a
The print setting menu may differ slightly depending on the connected printer.
~
1. During still image playback, select the still image you wish to print and
press the SET dial.
• The print setting menu appears.
• Depending on the printer, the message
II
BUSY.
II
may appear before the camcorder
displays the print setting menu.
2. Make sure that [PRINT] is selected and press the SET
dial.
Printing starts. The print setting menu disappears when printing
is complete.
a
Observe the following precautions during printing, otherwise printing may not
be performed correctly.
- Do not turn off the camcorder or the printer.
- Do not change the position of the TAPE/CARD switch.
- Do not detach the cable.
- Do not open the memory card cover or remove the memory card.
a
Images not recorded with this camcorder, uploaded from a computer, edited
on a computer and images whose file names have been changed may not be
printed correctly.
a
Cancel Printing
Press the SET dial while
II
NOW PRINTING
II
is displayed. A confirmation dialog
appears. Select [OK] and press the SET dial. Printing stops even if it is
incomplete and the paper is fed through.
a
Printing Errors
If an error occurs during the printing process, an error message appears
(CD
133).
- Canon printer: With most errors, printing resumes automatically after you
correct the error. If the error persists, press the SET dial to cancel printing.
Refer also to the printer manual for details.
- If the error still persists and printing does not restart, follow below
procedure:
1. Disconnect the cable.
2. Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).
3. Reconnect the cable.
-
°1
~' ~
n •
r+ _
~
:5'
~
r+ ••
:5'
\C
121