Reviewing a Still Image Right after Recording
You can select to display a still image for 2, 4, 6,8 or 10 seconds after it has been
recorded.
'('~~~ I
CAMERA SETUP
I~>I
REV lEW······· 2sec
Open the menu and select [CAMERA SETUP]. Select [REVIEW]. select a
setting option and close the menu.
o
A still image is displayed as long as you hold the PHOTO button after
recording.
o
The FILE OPERATION menu appears when you press the SET dial while you are
reviewing a still image, or when you press the SET dial right after recording. In
this menu, you can protect
(0
109) or erase (OJ 110) the image.
100