Inspections - MOTO GUZZI MGS-01 Corsa Workshop Manual

Minibook
Right cylinder:
1RH) From position 1S) turn the crankshaft by 270°, in the operating direction of rotation, thus taking the right piston
to TDC.
2RH) Right camshaft in position with valves closed
3RH) Turn the crankshaft by 69°30' in the direction opposite to operating direction of rotation.
4RH) Turn the camshaft in the operating direction of rotation up to the intake closing position, then turn in the
opposite direction until reaching a lift of 1 [mm].
5RH) Insert the nonius to measure pulley / cam coupling without moving the positions set for crankshaft and
camshaft.
11.4

INSPECTIONS

Heads
Diagram 11-63 is to be updated as follows:
Intake
6.972 6.987
45˚ 45˚ 15'
8
www.guzzitek.org - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
7.000 7.022
13.094 13.105mm
35,9 36,1
Exhaust
6.965 6.980 mm
45˚ 45˚ 15'
30,9 31,1