MOTO GUZZI MGS-01 Corsa Workshop Manual page 11

Connecting rods
Diagram 11-80 is to be updated as follows:
- Diagram 11-80/A: the value 47.13 – 47.14 for bearing bore is no longer valid.
- Con-rod bearings thickness: no bearing with oversized thickness is available.
- Crank pin diameter: only the standard size is available.
Values for gudgeon pin and bushing clearance:
Installed bushing inside diameter:
Gudgeon pin diameter
Clearance
- Assembling the connecting rods to the crankshaft: tightening to 8.5-9.3 [kgm] is no longer valid; see Torque
figure table.
Crankshaft
- No undersizes are available.
- Checking the weight for crankshaft balancing: no checks for balancing are scheduled outside the parent
company.
www.guzzitek.org - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
CARRILLO Connecting rod
22,4 22,6 22,035
23,825
23,775
22.035-22.055 [mm]
21.994-21.998 [mm]
0.037- 0.061 [mm]
22,055
Minibook
11