Advertisement
About the SoloCAT HD™
The SoloCAT™ HD HDMI over CAT5e/6 Extender kit is designed to be HDMI 1.4a compatible
and 3D capable, enabling the reliable transmission of the HDMI; bi directional IR and bi
directional RS232 signals up to 330ft in 1080p HD (even 2k/4k resolutions and 3D format).
Because the SoloCAT™ HD is HDMI 1.4 compatible it allows you to take full advantage of the
new technology by supporting much higher resolutions than 1080p or 1440p including 2k
(2048x1080p) and 4k (4096×3072) resolutions. Future versions of this device will add the
capability for Ethernet data channel, allowing other HDMI 1.4 enabled devices to share a
network connection for internet connectivity. Additionally for future versions, the audio return
channel which will send the audio signal back from the display to a receiver or other audio
device.
Since the SoloCAT™ HD has bi-directional IR, it is the perfect device for multi-room applications
and third party control systems. With bi-directional communication from a remote control or
control system, commands can be sent from the remote location back to the main equipment
center or the other way around. Note: The maximum usable distance depends on the quality
and characteristics of the cables. Higher resolutions and longer transmission distances work
better with low skew cables (<25ns/100m) for the best performance. Unshielded Cat5e/6 with
metal RJ-45 connectors and 568-B termination will provide best results.
For more information about HDMI over HDBaseT technology you can visit www.valens-
semi.com.
www.atlona.com | toll free: 1-877-536-36
For International: 1-408-962-0515
The Zektor Incorporated SoloCAT™ HD HDMI™ over single CAT5e/6 extender has been tested
for conformity to safety regulations and requirements, and has been certified for international
use. However, like all electronic equipments, the Zektor Incorporated SoloCAT™ should be
used with care. Please read and follow the safety instructions to protect yourself from possible
injury and to minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit
Do not attempt to service this unit yourself, except where explained in this manual
Provide proper ventilation and air circulation
Do not use near water
Keep objects that might damage the device and assure that the placement of this unit is on
a stable surface
Use only the power adapter and power cords and connection cables designed for this unit
Do not use liquid or aerosol cleaners to clean this unit
Always unplug the power to the device before cleaning
Safety and Notice
Advertisement
