Range Of Use; Maintenance Safety; Operating Instructions - T.I.P. LTP 40/10 Operating Instructions Manual

1.4.

Maintenance safety

Regular maintenance and care reduce the danger of possible operational disruptions and increase the life cycle of
your device.
1. Make sure, the repair of the motor and machine is done by qualified personal.
2. Make sure, the motor is switched OFF and the ignition got interrupted, before the protective devices are
dismounted or removed.
3. Keep the engine clean and make sure all stickers are legible. On the stickers are important operational
instructions and warnings. Replace missing or illegible stickers.
Do not use any gasoline or flammable solvents for cleaning the machine. Vapors and solvents can get exploded.
Store the machine properly at a clean, dry place, and keep out of reach for children.
Notes and instructions with the following symbol require particular attention:
Any non observance of these instructions involves the danger of bodily harm to people and/or
damage to property.
Please inspect the device for damage occurred during transportation. In case of damage, the retailer has to be
informed immediately, at the latest within 8 days after the date of purchase.
Please observe the following pictograms:
Use caution when operating
machines powered by
combustion engines!
Do not use in enclosed spaces
or in rain or snow! Read the

operating instructions!

Accelerator lever
Speed control
High Low
2.

Range of use

Petrol engine pumps from T.I.P. are portable, self-priming pumps operated with petrol or a petrol-oil mixture,
depending on the model. These high-quality products with their convincing performance data were developed
especially for mains-independent irrigation or drainage applications. Compact dimensions and a low weight
facilitate transportation between changing locations of use.
These units are suitable for pumping clean to slightly dirty water.
The typical ranges of use of petrol-engine pumps include:
• Water supply on construction sites
• Irrigation of gardens, garden beds, fields as well as sprinkling applications
• Water discharge from wells, cisterns, watercourses etc.
• Drainage and filling of ponds, basins etc.
Owing to their high efficiency, the LTP 50/25 and LTP 80/48 models are also appropriate for use in industrial or
agricultural applications.
12
You are required to read the
operating instructions before
placing the device in service!
The device is equipped with
a low-oil safety feature.
Read the operating
instructions!
Can produce noise up
to max. 103 dB!
Translation of the Original Operating Instructions
Caution – keep your distance
from the device. Heat
generation!
Before placing the device in
service, make sure that it has
sufficient engine oil! Check
the engine oil level!
Wear hearing Before initial operation,
protection fully bleed the pump
housing by filling it with
2
Caution – combustion
engines generate exhaust
gases!
Switch the device off before
filling up. No smoking! No
naked flames!
Choke
Operation
Start
water.